Kapton® HN Polyimide Film----[[LIREN ELECTRICAL INSULATION MATERIALS]]

HN Polyimide Film (e.g Kapton® HN, APICAL® Type AV, LIREN® HN film) is a general-purpose film, synthesized by polymerizing an aromatic dianhydride and an aromatic diamine. It has excellent balance of electrical , mechanical, physical, thermal, and chemical properties over a wide range of temperatures from -269°C to 400°C (-452°F to 752°F). It also has good dimensional stability, radiation resistance, and flame resistance. It does not melt or burn as it has the highest UL-94 flammability rating: V-0. The UL file No of LIREN® HN film is E318791.

HN Polyimide Film can be metallized, punched, formed, laminated, or adhesive coated. It can be used in a variety of electrical and electronic insulation applications: motor slot liners, magnet wire insulation, formed coil insulation, transformer and capacitor insulation, wire and cable tapes, substrates for flexible printed circuits (FPC), bar code label, magnetic and pressure-sensitive tapes, and insulation tubing.

Type	HN Polyimide Film Typical Value
Type	Nominal Thickness (µm)	Unit Weight (g/m²)	Tensile Strength (MPa)	Elongation at Rupture (%)	Shrinkage 30min at 150℃(%)	Shrinkage 120min at 200℃ (%)	Dielectric Strength (MV/m)	Volume Resistivity (Ω.cm)	Dielectric Constant At 1kHz	Dielectric Factor At 1kHZ
LR-PI50HN	13	18.3	171	72	0.04	0.09	300	1.5x10¹⁷	≤3.9	≤4.0X10^-3
LR-PI80HN	20	28.4	178	97	0.05	0.09	319	2.9x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI100HN	25	35.5	191	100	0.06	0.09	305	7.8x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI200HN	50	71.0	183	105	0.06	0.09	282	7.7x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI300HN	75	106.5	180	110	0.06	0.15	230	7.2x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI400HN	100	142.0	175	101	0.06	0.15	210	5.6x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI500HN	125	177.5	163	100	0.10	0.15	180	4.9x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI600HN	150	213.0	150	105	0.10	0.15	156	4.6x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI700HN	175	248.5	145	110	0.10	0.15	143	3.9x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI800HN	200	284.0	135	105	0.10	0.15	133	3.8x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI900HN	225	319.5	125	95	0.10	0.15	128	3.8x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI1000HN	250	355.5	122	66	0.10	0.15	121	3.1x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI100H	25	35.5	178	65	0.12	0.25	234	5.5x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI200H	50	71.0	173	76	0.12	0.25	200	4.7x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI300H	75	106.5	169	78	0.12	0.25	185	4.1x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI400H	100	142.0	164	81	0.12	0.25	173	3.2x10¹⁵	≤3.9	≤4.0X10^-3
LR-PI500H	125	177.5	160	85	0.12	0.25	145	2.1x10¹⁵	≤3.9	≤4.0X10^-3

Film Roll Size: 3" paper or plastic core, film width: 6mm -1040mm; standard width: 520mm, 1000mm, and 1040mm.

※ Special width, thickness or combinations can be supplied per customer’s request.

Note: The technical information, data, recommendations, and other statements provided are based on tests or research which we believe to be reliable, but such information shall in no event constitute a warranty of any kind by Liren. Before using this product, all purchasers should carefully evaluate its suitability for their intended applications. Kapton® is a registered trademark of DuPont. APICAL® is a registered trademark of Kaneka. LIREN® is a registered trademark of Liren Elec Insulation Materials Pte Ltd.