Kapton® FCR Corona Resistant Polyimide FEP Film----[[LIREN ELECTRICAL INSULATION MATERIALS]]

>>Product Show

>> Kapton® FCR Corona Resistant Polyimide FEP Film

FCR Corona Resistant Polyimide FEP Film

Description:

FCR Corona Resistant Polyimide FEP Film (e.g Kapton® FCR, LIREN® FCR Film) is a heat bondable corona resistant film, constructed of Corona Resistant Polyimide Film coated with FEP fluoropolymer adhesive on one side (FCR) or both sides (FCRF). The UL File No of LIREN® FCR film is E318791.

FCR Corona Resistant Film not only combines the excellent electrical, thermal, and chemical properties of Polyimide Film and FEP resin, but also has superior corona resistance, heat sealing effect and thermal conductivity. It withstands the damaging effects of corona discharge, enhances service life and operational efficiencies of conventional electrical insulation materials.

Characteristics

• Excellent heat sealability

• Superior Corona Resistance

• High Bond Strength

• High dielectric strength

• Longer insulation life

• High Temperature resistance

Application:

FCR Corona Resistant Polyimide FEP Film can be melted and formed soon as desired at defined temperature. It is widely used as electrical insulation materials where there is a need for enhanced insulation life under partial discharge environments in rail traction, industrial motors and generators, transformer, magnet wire, coils and so on.

Technical Data:

Properties		Units	FCR Type Film				FCRF Type Film
Properties		Units	LR-FEPPI 150FCR019	LR-FEPPI 200FCR011	LR-FEPPI 250FCR029	LR-FEPPI 300FCR021	LR-FEPPI 150FCR616	LR-FEPPI 200FCR919	LR-FEPPI 300FCR929
Nominal Thickness		μm	38.0	50.0	63.0	75.0	40.0	50.0	75.0
Structure	FEP	μm	12.5	25.4	12.5	25.0	7.5	12.5	12.5
	PI Film	μm	25.4	25.4	50.0	50.0	25.0	25.0	50.0
	FEP		-	-	-	-	7.5	12.5	12.5
Tensile Strength MD		MPa	≥90	≥85	≥90	≥90	≥85	≥85	≥90
Elongation MD		%	≥50	≥50	≥50	≥50	≥50	≥50	≥50
Dielectric Strength		MV/m	≥120	≥120	≥120	≥120	≥100	≥100	≥100
Peel Strength		N/25cm	≥6	≥6	≥6	≥6	≥6	≥6	≥6
Surface Resistivity		Ω	≥1.0×10¹³	≥1.0×10¹³	≥1.0×10¹³	≥1.0×10¹³	≥1.0×10¹³	≥1.0×10¹³	≥1.0×10¹³
Volume Resistivity		Ω.cm	≥1.0×10¹⁵	≥1.0×10¹⁵	≥1.0×10¹⁵	≥1.0×10¹⁵	≥1.0×10¹⁵	≥1.0×10¹⁵	≥1.0×10¹⁵
Dielectric Constant			2.5～3.9	2.5～3.9	2.5～3.9	2.5～3.9	2.5～3.9	2.5～3.9	2.5～3.9
Dielectric Factor			≤4.0×10^-3	≤4.0×10^-3	≤4.0×10^-3	≤4.0×10^-3	≤4.0×10^-3	≤4.0×10^-3	≤4.0×10^-3
Corona Resistance at 1KV, 20KHz		h	≥85	≥85	≥85	≥85	≥85	≥85	≥85

Tape Size: 3" paper or plastic core, from 9mm width upward, O.D 210~250mm

Spool Size: 3" paper or plastic core, 70mm width, O.D 295~305mm

※ Special thickness or combinations can be supplied per customer's request.

Products can be supplied in spool, tape or roll according to customer's requirement.

Shelf Life: To obtain best performance, use this product within 12 months from date of delivery and store under normal

conditions of 60º to 80ºF (16º to 27ºC) and 40 to 60% R.H. in the original carton.

Note: The technical information, data, recommendations, and other statements provided are based on tests or research which we believe to be reliable, but such information shall in no event constitute a warranty of any kind by Liren. Before using this product, all purchasers should carefully evaluate its suitability for their intended applications. Kapton® is a registered trademark of DuPont. LIREN® is a registered trademark of Liren Elec Insulation Materials Pte Ltd.

Click Count：5933 Input Time：2015-02-07 【HOME】