Low Shrinkage PET Film for Membrane Switches

Description:

LR-M10S Low Shrinkage Polyester Film (equivalent to Lumirror® T56, Melinex® ST505) is a heat stabilized film with low shrinkage, excellent adhesion to a wide range of solvent based inks, graphics inks and varnishes, silver conductive inks and dielectric inks.

Application:

Low Shrinkage Polyester Film can be used in all applications which require high transparency and dimensional stability, especially membrane switch, flexible printing circuits,and graphic uses

Properties		Units	LR-M10S PET Film Typical Value
Normal Thickness		μm	75	100	125
Tensile Strength	MD	MPa	181	170	165
	TD		185	175	170
Thermal Shrinkage at 150°C X 30 min	MD	%	0.5	0.5	0.5
	TD		0.2	0.2	0.2
Soakage Tension		mN/m	42	42	42
Volume Resistivity		Ω.m	5X1014	5X1015	5X1014
Breakdown Voltage		KV	12.8	13.5	14.6

Normal Width: 500mm, 1000mm                                                           

Tape Size:  3" paper or plastic core, from 10mm width upward

※ Special thickness or combinations can be supplied according to customer.

※   Products can be supplied in roll and tape according to customer requests.

    Notes: The technical information and data, recommendations, and other statements provided are based on tests or experience which we believes to be reliable, but the accuracy or completeness of such information is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable your intended application. Melinex ®is a registered trademark of DuPont Teijin. Lumirror® is a registered trademark of Toray.